Pick-Up Truck Racks - Ladder Racks

Econo Truck Ladder Rack

Front Rack Only
  • Models available to custom fit full size or mini trucks with short or long bed.  Special taller model for Super Duty Crew Cab.
  • Available in standard and extended length .  Extended length racks position front crossbar beyond windshield on extended cab trucks.  This reduces wind noise, looks better, and provides more support for long cargo.
  • Big 2" Diameter .083" Wall High Tensile Strength Steel Tubing Is The Strongest Available
  • THIS IS HUGE!!!!!!!    All Pro II Series Racks Are NOW Either Yellow Zinc Chromate Plated or Zinc Epoxy Primed Beneath A Marine Grade Powder Coat Finish That Is Specially Formulated To Resist Corrosion and Abrasion.  THIS IS THE MOST RUST RESISTANT FINISH IN THE INDUSTRY.
  • Removable 4th Crossbar Included No Charge
  • Quick Release Rear Crossbar Accomodates Tall Loads
  • Rear Grab Loops Make It Easy To Climb Up Into Truck Bed
  • Built-In Rope Ties On Each Leg
  • Rack Removes Easily With 4 Bolts
  • Full Line Of Commercial Accessories Available
  • Fits all makes and models of full size and mini trucks
  • Available front only or front and back. 
  • Beefy 1/4" thick 14" long foot plates spread load along truck bed rail and provide a flat forward mount for tool box.  Foot plates attach with bolts.  Accessory No-Drill Clamp-On Mount Kit (part 31580) available. 
  • 2" diameter aerodynamic crossbar reduces wind noise.
  • Crossbar height can be set at either 23.5" or 26.5"
  • Fits all makes and models of full size and mini trucks
  • Available front only or front and back.
  • Beefy 1/4" thick 14" long foot plates spread load along truck bed rail and provide a flat forward mount for tool box.  Foot plates attach with no-drill clamps.  Easy to remove rack when not in use.
  • 2" diameter aerodynamic crossbar reduces wind noise.
  • Crossbar height can be set at either 23.5" or 26.5".


Cab Guard

GT Econo Rack

Quick Pack Ladder Rack
  • Fits all makes and models of full size truck
  • Beefy 1/4" thick 14" long foot plates spread load along truck bed rail and provide a flat mounting base for tool box.  Foot plates attach with no-drill clamps.  Easy to remove rack when not in use.
  • 2" diameter aerodynamic crossbar reduces wind noise.
  • Crossbar height can be set at either 23.5" or 26.5".
  • 16 gage redicoat cab guard screen has open webbing for good visibility
  • Fits all makes and models of full size and mini trucks
  • Sleek side plates have 16" base to spread load along truck bed rail. Side plates attach with no-drill clamps . Easy to remove rack when not in use.
  • 2" diameter aerodynamic crossbar reduces wind noise.
  • 26" high crossbar keeps cargo off
    the cab
     
  • Fits all makes and models of full size and mini trucks.
  • 250 Pound Cargo Capacity
  • Premium Gloss Black Powdercoat Finish
  • Rock solid 1.75" square x .095" upright support tubes remain attached, out of the way and out of sight.  Uprights are removed and installed in seconds. 
  • Telescoping upright arms accomodate loads up to 36" wide
  • Install on driver or passenger side of truck


Econo Van Rack

Conduit Box

Load Dividers
  • Fits all makes and models of commercial van with rain gutters
  • 500 Pound Cargo Capacity
  • Premium gloss black or white powdercoat finish
  • Available in 2 or 3 crossbar sets
  • Aerodynamic 2" diameter crossbars support heavy loads
  • Beefy 3/16" thick crossbar uprights have wide base to spread load.  Three height settings reduce wind noise. Uprights attach with no-drill clamps that are easily removed when rack is not in use. Rope hooks on each upright.
Carrying stall safely secures tubing or pipe to your rack. Made of heavy gauge powder coated steel. Includes complete mounting bracket kit. Use with our load dividers or when boxes are used in pairs, cargo can be locked to prevent theft. These handy uprights (sold in sets of two) clamp to the rack crossbars. Use to prevent loads of conduit or lumber from "fanning out". Use to secure canoes, kyacks, surfboards, etc.


Bed Support

Ladder Clamp

Emergency Light/Antenna Mount
These adjustable struts (sold in sets of two) transfer much of the rack load from the bedrail to the floor of your truck. Use in front only. Recommended if you intend to carry heavy loads. Available full size trucks only. Our lockable "Jaws Top Mount" ladder clamp securely mounts a ladder on top of your truck or van rack. Required by law in som states Mounts emergency flasher light or antenna anywhere along side channel of rack. Slotted mount plate accommodates bolt pattern of most sizes and brands of lights
LIFTETIME FRAME WARRANTY: If your product cracks, bend , buckles, or structually fails in any way, Kargo Master, at its option and expense, will either replace or repair the product
 
 
 

Millennium Line-X & Truck Accessories
West: g 905 N Raceway Rd gg Indianapolis, IN 46234 gg 317-209-8000
South: 494 US 31 North Ste G gg Greenwood, IN 46142gg 317-807-2000

Home
Contractors/Fleet Info
Photo Gallery